Angel Silicone Mould – Hanging Decoration and Christmas Candle Holder
A professional two-piece silicone mould — a round base and an angel in bas-relief — to create a Christmas candle holder with an angel in a refined porcelain effect, or single decorations to hang on the tree and on gift wrapping.
What you can create
With Aqua Resin, the natural, non-toxic and safe alpha plaster, you assemble the candle holder with the angel as a scenic backdrop on the festive table, cast the angel on its own as a hanging Christmas decoration with a ribbon, or create plaster angels as favours for christenings and communions. Customise them with Aqua Pigment or with the gold of brush-applied Aqua Metal.
How to use it
- Mix 100 g of Aqua Resin with 30 g of cold water, pouring the powder into the water.
- Pour the mixture into the two pieces of the mould.
- Demould after 30 minutes: the flexible silicone preserves every detail of the bas-relief.
- Let it dry completely for 24 hours, then assemble the base and the angel.
- For candle holder use, protect the surface from wax and moisture with brush-applied Aqua Shield.
Details
- Base diameter: 9.5 cm – Angel: 9.5 × 8 cm – Thickness: 0.4 cm
- Flexible, reusable two-piece silicone mould
- Perfect for Christmas centrepieces, hanging decorations and DIY favours
Molds for Aqua Resin
How to use them
-
MIX
Aqua Resin with water
-
FILLING INTO THE MOLDS
Perfect molds for your creations
-
SHAPED
Your perfect creation
Don't stop at the mold: explore, color, protect!
-
COLA AQUA RESIN IN THE MOLDS
Mix Aqua Resin with water and pour the mixture into the mold of your choice!
In just 30 minutes you will have your perfect creation! -
COLORS AND GLITTER FOR AQUA RESIN
Aqua Resin is easy to color with Aqua Pigments. Make your creations sparkle with Aqua Glitter.
-
PROTECT YOUR CREATIONS
Aqua Shield protects against water and wax stains and gives you a shiny, smooth-to-the-touch finish!
Collect them all
Find inspiration
FAQ
-
You can use molds
in silicone, which are ideal because they are flexible and allow easy
removal of the object once it has hardened. -
No, the molds in
silicone do not require release agents with Aqua Resin. Just
make sure they are clean and dry to get a perfect result -
Yes! Silicone molds are reusable.
many times. To make them last a long time, clean them gently with water and
soap after each use. -
It is enough to wash them
with warm water and neutral soap. Avoid abrasive sponges or detergents.
aggressive agents that could damage the surface of the mold. -
Keep them in one place
dry and away from heat sources or direct light. To keep them soft and
flexible, you can dust them occasionally with talcum powder. -
Absolutely yes! You can make them with
silicone rubber, modeling unique shapes perfect for your projects
personalized. -
No, Aqua Resin is delicate and not
aggressive: it does not damage silicone molds. However, it is always recommended
avoid extreme temperatures when casting. -
Yes, very much! Glossy molds.
will give back shiny surfaces, while opaque molds will give a more
Satin. Choose the finish type based on your project.
Your first project? Start here and save 10%!
Download the free eBook with step-by-step tutorials and original ideas to get started. All you need is your email address!